minrray UV401, Руководство пользователя

Страница: 21 / 37

- 20 -
5. Set Key and Clear Preset Position Key
Set the preset position: Press [Preset] and one of the number
keys (0-9) successively, and a preset position corresponding to
the number key will be preset.
Note: Up to 10 preset positions can be set with the remote
control.
Call preset position:
Press number keys 0-9 to call stored
preset positions. Note: This number key is ineffective if it's not
preset.
Clear preset position:
Press [Clear Preset] and one of the
number keys (0-9) successively, and the corresponding preset
position will be cancelled.
Note: All preset positions will be cancelled if [#] key is pressed
for three consecutive times.
6. PTZ Control Key
7. Menu Control Key
8. Remote Control Address Setup
Rotate up: Press [ ] key Rotate down: Press [ ] key
Rotate to the left: Press [ ] key
Rotate to the right: Press
[ ]key
Middle position: Press [HOME] key
Up/down/left/right keys: Control the rotation of PTZ up/down
and to the left/right; press and hold the up/down/left/right keys,
and the PTZ will rotate continuously at increasing rate until the
stroke end is reached; the rotation stops when the keys are
released midway.
[HOME] key: The PTZ returns to the middle position or gets
into the next level of menu.
[Menu] key: Enter/exit the OSD menu or return to previous
menu
[HOME] key: The PTZ returns to the middle position, confirm
the modification or enters the next level of menu
[i] [U] keys: Select the control items
[
曰
] [-+]
keys: Modify parameter values
[Backlight On/Off] key: Turn on/off the backlight
compensation
[*] + [#] + [F1]: Set address #1
[*] + [#] + [F2]:
Set address #2
[*] + [#] + [F3]: Set address #3
[*] + [#] + [F4]: Set address #4