40
41
– 2" LCD screen
– 3.7V / 1000mAh replaceable Lithium-Ion battery
2. Controls
The orange capture button is located on the top of the camera, along with
LEDs indicating the battery charge and the currently active function, as well
as the On and Off button (main button).
You’ll find the combined WiFi button and WiFi status display and the objec-
tive lens on the front of the camera.
You’ll see a compartment with a plastic cover on the side of the camera. You
can use your fingernail to remove the cover. You’ll find the memory card slot
on the top right, and the micro USB connector beside it on the left. The micro
HDMI connector is located underneath.
3. Preparing the camera
1. Charging the battery:
You must charge the battery fully before using the camera for the first
time. To do this, connect the camera to a charger or charging station
using the micro USB cable. The LED on the top will now light red. The
battery takes about 3.5 hours to charge fully. The battery display at the
bottom right of the screen will indicate when the battery is full. Some
functions, such as WiFi, are not available when the battery is low.
2. Turning on and off:
Press the On and Off button for 2 seconds to switch on the camera. The
status LED on the top of the camera will light blue. The camera will jump
to video mode in the factory settings. To switch off the camera, press the
button again for 2 seconds.
3. Inserting the memory card:
Insert a micro SD card into the card slot at the side of the camera. We rec-
ommend class 10 (high speed) micro SD cards for optimal picture results.
There is only one way to insert the SD card correctly. Do not use force to
do so in order to ensure that you do not damage the camera or the SD
card. SD cards that have not been used in the camera previously should
be formatted before use (see further details below).
Assembling the camera in the underwater housing
Make sure that the housing is clean and dry. Insert the camera into the hous-
ing so that the lens is positioned in the intended slot. Then close the fasten-
er. You can now use the accessory parts provided to assemble the camera.
Recording video
Press the capture button to begin recording video. Press it again to stop
the video.
Содержание ACX 300
Страница 1: ...Bedienungsanleitung Instructions ACX 300 3K Action Cam ...
Страница 32: ...Notizen Notes ...