Minolta PageWorks 18, Руководство пользователя

Страница: 115 / 219

4-29
Using the Printer Driver Under Windows 95/98/NT 4.0
Printer Driver
Chapter 4
Portrait
Portrait documents are printed lengthwise (vertically), relative to the
page.
Landscape
Landscape documents are printed widthwise (horizontally), relative to
the page.
Collate
The Collate feature supports multi-document printing (when the
number of copies being output is two or more). The
Off
setting is a
group mode (1,1,1…2,2,2…3,3,3). When the Collate setting is
On
,
documents are sorted as they are output (1,2,3…1,2,3…1,2,3).
Note
Paper Source
The
Paper Source
item specifies the tray from which paper is fed
from the printer. To change this setting, just select the desired paper
source from the drop-down list. If the desired tray is an option and does
not appear as a paper source, make sure that it has been added in the
Device Option tab.
You can specify to print the first of a multi-page document from a tray
separate from the rest of the document. To specify a first page from a
separate tray, check the
Different paper for 1st page box and select
the desired tray from the
1st Page
drop-down list.
Note
• Make sure that the Collate function of other applications is set to off.
• When
Paper Source
is set to Tray1, the paper size set in the printer
driver must match the
Tray1 Paper Size
in the
Tray1 Setting
of the
Control Panel, otherwise a Size Mismatch error will occur. See “Using
the Control Panel” on page 5-7.