Minolta MAGICOLOR 2, Руководство пользователя

Страница: 24 / 188

Replacing a
Toner Cartridge
QMS magicolor 2 Op eration 2-12
v
7 Install the toner cartridge.
Align the toner cartridge with
the cartridge guides, and gen-
tly push the cartridge into the
printer until it’s firmly seated.
s
Caution:
Each toner cartridge has a colored label that
corresponds to a colored label to the right of the cartridge slots.
Always install the toner cartridge in the slot with a label of the
same color.
If a toner cartridge doesn’t slide in easily, don’t force it. In
addition, don’t push it in until you hear a click. If you hear a click,
you’ve locked it into place against the OPC belt cartridge and
your prints may be smudged. Pull the toner cartridge out so that
it’s firmly seated but not locked into place. While the cartridges
may appear not to be fully inserted, closing the front cover will
guide them to their final position.
8 Close the printer’s front cover.
9 In the Operator Control/Consumables/Item Replaced/ x Toner
menu choose Yes to reset the consumables usage monitor-
ing system.
» Note: When you replace a toner cartridge after an
x TONER
EMPTY
message displays in the message window, the engine
automatically recovers. However, you must manually reset the
consumables usage monitoring system to ensure accurate
consumables monitoring.
To access consumables usage information, use the Operator
Control/Consumables/Print Statistics menu or the CrownView
printer web page.
Colored
labels