Minolta MAGICOLOR 2, Руководство пользователя

Страница: 106 / 188

Understanding
Media Jam
Status
Messages
QMS magicolor 2 Op eration 7-4
Understanding Media Jam
Status Messages
When a jam occurs, the message window on the control panel dis-
plays one of four messages:
MISFEED JAM
,
INNER JAM, OUTER
JAM,
or
DRUM JAM
. Frequent jams in any area indicate that area
should be checked, repaired, or cleaned. Repeated jams may also
happen if you’re using the wrong weight print media.
n
Misfeed jams occur in the standard cassette or optional lower
input feeder. A misfeed jam may be as simple as a sheet of media
not being picked, or it may be that the media was picked but not
fed properly. Access to this area is through the cassette slot.
n
Inner jams occur in the transfer drum/transfer unit area. This type
of jam means that the media did not make it to the paper exit
area. Access to this area is through the printer’s rear cover.
n
Outer jams occur in the fuser/media exit area. Jams of this type
usually means that media is stuck in the fuser/exit roller area.
Access to this area is through the printer’s top cover.
n
Drum jams occur if the media winds around the transfer drum.
Access to this area is through the printer’s rear cover.