background image

Warranty Considerations 

47

Warranty Considerations

Various factors can affect a printer’s warranty. Two important ones are elec-
trostatic discharge and consumables. Read your printer warranty carefully.

Attention

It’s very important to protect the printer controller board and any 
associated daughterboard or module from electrostatic damage while 
performing any task involving the controller board.

Attention

Don’t return any merchandise to the manufacturer without calling for 
a Return Merchandise Authorization (RMA) number. Refer to the 
Service & Support Guide for the Support telephone number where you 
can obtain an RMA number. If the printer is not strapped to the pallet or 
if the RMA number is not prominently visible on the outside of return 
inventory, MINOLTA-QMS will not accept receipt.

If MINOLTA-QMS printer failure or damage is found to be directly attributable 
to the use of non-MINOLTA-QMS approved consumables, print media, and/or 
accessories, MINOLTA-QMS will not repair the printer free of charge. In this 

These Actions Could Result in Voiding Your Warranty

Instructions

Failure to follow instructions as outlined in your printer 
documentation.

Modifications

Any modifications or changes to this product not expressly 
approved in writing by the manufacturer responsible for 
compliance to Federal Regulations could void the user's 
authority to operate this product within the Laws and Reg-
ulations of the Federal Communications Commission.

Consumables

Use of consumables not manufactured by 
MINOLTA-QMS. For example, refilled toner cartridges 
may produce variations in toner quality and reliability, and 
can reduce the print quality of your documents. Any dam-
age to the printer or quality problems caused by a refilled 
toner cartridge use will void your warranty. 

Accessories

Use of accessories not manufactured/supported by 
MINOLTA-QMS. 

Print Media

Use of of nonsupported print media.

OPC Belt

Any damage resulting from mishandling of the OPC belt 
cartridge (voids the warranty of the OPC belt cartridge). 

Содержание MAGICOLOR 6110





















































Отзывы: