MINOLTA-QMS MAGICOLOR 6110, Руководство по установке

Страница: 40 / 52

Troubleshooting 40
If you’ve followed all of the instructions and still have problems you can’t
solve, see the Service & Support Guide for the MINOLTA-QMS office closest
to you.
Printouts
seem faded
on one side
of the page. The printer is not on a
level enough surface. Level the printer surface. The slant
of the printer should not exceed
1.5° after the printer is placed on it
(for example, a round pencil laid on
the surface shouldn’t roll in any
direction).
Printer
power is not
on. The power cord is not
correctly plugged into the
outlet. Turn the power switch off, remove
the power cord from the outlet,
plug it back in, and turn the power
back on.
The printer power switch
is not on. Toggle the printer power switch to
the On position.
Something is wrong with
the outlet you are using
for the printer. Plug another electrical appliance
into the outlet and see whether it
operates properly.
Printer
power is not
on. The printer is connected
to an outlet with a voltage
or frequency that does not
match the printer specifi-
cations. Check the voltage and frequency of
the outlet. Use a power source with
the following specifications:
—Power
Japan: 100 VAC 50–60 Hz
12 amps
North America: 120 VAC
50–60 Hz 8 amps
Europe: 220-240 VAC 50–60 Hz
6 amps
Latin America:
120 VAC 50–60 Hz
8 amps
220-240 VAC 50–60 Hz
6 amps
—Voltage fluctuation
Japan: 100 VAC ±10%
North America: 120 VAC ±10%
Europe: 220-240 VAC ±10%
Latin America:
120 VAC ±10%
220-240 VAC ±10%
—Frequency fluctuation rate
within 50/60 ±3 Hz
Symptom Cause Solution