10 | minnkotamotors.com
©2019 Johnson Outdoors Marine Electronics, Inc.
INSTALLATION
p. Using a #2 Phillips Screwdriver, replace the two
Screws to secure the Right Sideplate to the Mount.
Installing the CoPilot Receiver for Motors Manufactured 2017 or After
b. Using a #2 Phillips Screwdriver, remove the two
Screws from the Right Sideplate that secure it to
the Mount.
c. Remove the Right Sideplate.
a. Make sure that the Power Cables from the battery
are disconnected, or that the breaker,
if equipped, is "off."
Power Cables
Power Cables
WARNING
Make sure the motor is mounted on a secure, level surface
and is not connected to a power source.
Sideplate Screw
Sideplate Screw
Right Sideplate
Right Sideplate
Sideplate Screw
Sideplate Screw
NOTICE:
Please verify the year your motor was manufactured before beginning. See page 6 for details.
1
2
2b
9
2c