40 | minnkotamotors.com
©2019 Johnson Outdoors Marine Electronics, Inc.
COPILOT
AJOUT/RETRAIT DE TÉLÉCOMMANDES
La télécommande CoPilot est livrée déjà couplée avec le récepteur CoPilot. Toute télécommande supplémentaire doit être couplée au
récepteur. Le récepteur stocke toutes les informations de couplage, même lorsque le moteur est déconnecté d’une source d’alimentation.
Votre récepteur peut être couplé avec un maximum de dix télécommandes. Les télécommandes supplémentaires peuvent être couplées
en suivant les étapes suivantes. Ces étapes fonctionnent également pour coupler une télécommande si toutes les télécommandes sont
effacées du récepteur.
Pour Coupler des Télécommandes
Pour Effacer Toutes les Télécommandes du Récepteur
a. À l’aide d’un petit objet pointu tel qu’un stylo ou un
tournevis, gardez enfoncé le bouton Coupler situé
sur le côté du récepteur.
b. Le récepteur émettra une tonalité continue.
a. Déconnectez l’alimentation du récepteur CoPilot en
débranchant les câbles d’alimentation, ou en vous
assurant que le disjoncteur, le cas échéant, ouvre le
circuit.
c. Appuyez sur n’importe quel bouton de la
télécommande.
d. Le récepteur émettra 4 bips confirmant qu’il a bien
été couplé à la télécommande.
AVIS :
Coupler la même télécommande n’effacera
pas les télécommandes précédemment couplées.
Si le récepteur a été couplé à dix télécommandes,
y coupler une onzième remplacera la première
télécommande.
Câbles d’Alimentation
Câbles d’Alimentation
Bouton Coupler
Bouton Coupler
Plaque Latérale
Plaque Latérale
Droite
Droite
1
2
1