minnkotamotors.com | 7
©2019 Johnson Outdoors Marine Electronics, Inc.
INSTALLATION
INSTALLATION
Installing the CoPilot Receiver for Motors Manufactured 2016 or Prior
b. Using a #2 Phillips Screwdriver, remove the two
Screws from the Right Sideplate that secure it to
the Mount.
c. Remove the Right Sideplate.
a. Make sure that the Power Cables from the battery
are disconnected, or that the breaker,
if equipped, is "off."
Power Cables
Power Cables
WARNING
Make sure the motor is mounted on a secure, level surface
and is not connected to a power source.
Sideplate Screw
Sideplate Screw
Right Sideplate
Right Sideplate
d. Turn the Right Sideplate over. On the back side
of the Right Sideplate, remove the three screws
holding the CoPilot Cover in place using a #2
Phillips Screwdriver.
Right Sideplate
Right Sideplate
CoPilot Cover
CoPilot Cover
Screws
Screws
NOTICE:
Please verify the year your motor was manufactured before beginning. See page 6 for details.
1
2
3
2c
2b
• #1 Phillips Screw Driver
• #2 Phillips Screw Driver
TOOLS AND RESOURCES REQUIRED