PWR-ICE250 Manual
miniDSP Ltd – Hong Kong / Email :
/ Features and Specifications are subject to change without prior notice
P 9
BTL configuration for bridged mode (Mono mode) / 1 x 500W Max @ 8Ohms
The PWR-ICE250 can operate in “bridged” mode where both channels are combined to a mono output. To enable the bridged
mode, you first need to configure the amplifier from the software to “Mono/Bridged” mode.
See below picture for the wiring in a Bridged mode. Note that both RED wires(positive) are used in this configuration.
2.3.3
Enclosure fitting
The PWR-ICE250 is not completely sealed for the XLR conn Reset. Some of these connectors not having a way to be 100%
sealed. For that reason, it may require a separate “sealed” enclosure for high power/low frequency applications such as a sub.
Please consult the mechanical drawings at the end of this user manual for more info about dimension and recommended cut out.
-
+
POSITIVE OUT
NEGATIVE OUT
