PWR-ICE250 Manual
miniDSP Ltd – Hong Kong / Email :
/ Features and Specifications are subject to change without prior notice
P 17
Plug-in Architecture
2.9.1
Main Page
Main input page for the PWR-ICE 250 plug-in
The main control page can be summarized in few core sections.
•
File Access to Load/Save configuration
•
Restore: Access to restore the whole system or only the current selected configuration (preset)
•
Help: Link to the help file
•
Main control tab: Allows control of all main DSP control settings (e.g. Filters, Gain, metering.. )
•
Device Tree section: List all device discovered on the network
•
Master Mute: Mute all inputs & outputs signal
2.9.2
Preset Memory selection
The PWR-ICE 250 allows the user to create up to 4 preset memories for a quick reconfiguration of the processor. Under each
configuration, all settings of the platform are saved.
Placed at the top of the user interface, the use of configurations couldn’t be easier. Simply toggle between configurations by clicking
on the config button. The currently selected configuration
WARNING: By toggling configurations, you may go from a working configuration (i.e. correct volume/setup/Eq) to an unknown
(or improperly configured) configuration. We therefore recommend that you perform a quick configuration offline (without
being connected/synchronized to the processor) to prevent any damage to your equipment.
2.9.3
Input source selection
The first step in configuring your MiniDSP consists in making sure audio is being fed to the input correctly. Two types of inputs can be
selected on a PWR-ICE250:
- Analog input: XLR analog input OR RCA unbalanced input
- Digital input: AES input or SPDIF input (Unbalanced into XLR). When toggling this ON, the XLR#2 will become a Digital input, routing
the audio to the AES receiver.
Preset Memory
selection
Main Menu
Master Mute
Device Tree
Main control
window
