PWR-ICE250 Manual
miniDSP Ltd – Hong Kong / Email :
/ Features and Specifications are subject to change without prior notice
P 15
Software setup
A Windows PC environment is required for the initial configuration of the product. Here are the minimum requirements.
Software
-
Microsoft• ® Windows® Vista® SP1/ XP pro SP2 / Windows 7
-
Microsoft• ® .NET framework v3.5
-
Latest version of Adobe Flash web plug-in from Adobe.com website :
http://get.adobe.com/flashplayer/
-
Latest version of the Adobe Air environment from Adobe Website:
http://get.adobe.com/air/
Hardware
-
PC with 1GHz or higher processor clock speed recommended / Intel® Pentium®/Celeron® family, or AMD K6®/AMD
Athlon®/AMD Duron® family, or compatible processor recommended.
-
256 megabytes (MB) of RAM or higher recommended
-
Ethernet card (100/1000Mbps)
-
Keyboard and mouse or compatible pointing device
Step1: Pre-installation steps
-
Install .net framework and .Air environment on your PC.
Step2: Download the PWR-ICE 1x2 package
-
Login with your user account on miniDSP website to gain access to the secure section
-
The latest version of the PWR-ICE 1x2 will be available from the User Downloads section. (http://minidsp.com/userdownloads
)
Step3: Installation
-
Launch the PWR-ICE plug-in
Following a successful installation, PWR-ICE plug-in will automatically start and discover modules on the network if already connected.
Note that if you were not connected to internet at the time of software installation and didn’t update you Flash/Flex installation, the
software will not boot up. Make sure to connect to Internet to get the latest release of Adobe environment.
Step4: Because the AVBStreamer requires Ethernet to communicate to the units, Windows OS may warn to “Unblock” the software
with the message below. Make sure to click on “Unblock” or you will not be able to access units.
Step5: With the software up and running, you’re now ready to connect and configure your module. There are 2 now possible path:
