PWR-ICE250 Manual
miniDSP Ltd – Hong Kong / Email :
/ Features and Specifications are subject to change without prior notice
P 4
DISCLAIMER / WARNING
An incorrect miniDSP configuration could easily damage your audio system. MiniDSP can not be responsible for any damage that
may result from the improper use of this product. As with any other product, we do recommend that you carefully read the manual
and other technical notes to insure you fully understand how to operate the board.
As a general guideline, you should first configure your miniDSP board
before
connecting anything to the outputs of the MiniDSP
(loudspeakers/other output sources). Doing so will insure that you have the software correctly configured and won’t cause any
damage to your system. Once again, miniDSP can not be responsible of any damages the board make cause to your system.
Finally, MiniDSP is a very flexible board and 99% of typical questions we receive at the tech support department are already
answered in this user manual. So please take the time to carefully read this user manual. Thanks for your understanding!
WARRANTY TERMS
miniDSP Ltd warrants all our products to be free of from defects in materials and workmanship for a period of one year from the
invoice date. Our warranty terms do not cover failure of the product due to an external trigger, misuse, servicing or usage outside of
the recommended use.
With this said, make sure to carefully read the user manual when customizing the board. Any board damage
investigated as failure to follow proper installation may void the warranty. So if in doubt,
please make sure to contact us first
.
Safety Instructions
• Read the information for use
• Please keep this user manual in a safe place during the lifetime of the product. The user manual forms an integral part of the
product. Reselling of the product is only possible if the user manual is available. Any changes made to the product have to be
documented in writing and passed on to the buyer in the event of resale.
• Heed all warnings.
• Follow all instructions.
• Do not use this product near water (for example, in damp rooms or near a swimming pool).
• Clean only with dry cloth.
• Do not cover the heat sink. Install in accordance with the user manual.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
• Protect the power cord from being walked on, pinched or damaged in any other way. Pay particular attention to plugs and the
point where they exit from the Amplifier Unit.
• The product may only be used in accordance with the information provided in the user manual. Before and during the usage of the
amplifier please ensure that all recommendations, especially the safety recommendations as detailed in the user manual, are
adhered to. The Amplifier Unit is designed for the amplification of pulsed audio signals and the Amplifier Unit should only be
connected to speakers with average impedance that is not lower than the impedances specified in the User's Manual.
• Do not place the product on an unstable cart, stand, tripod, bracket, or table. The device may fall, causing serious injury, and
serious damage to the device itself.
• The Amplifier Unit can only be disconnected from the power supply by removing the plug, which must be freely accessible at all
times. Unplug this Amplifier Unit during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel.
Damages that require service
Unplug the Amplifier Unit from the mains supply and refer to your dealer/distributor or other authorized repair workshop. Servicing is
required when
1.
The power-supply cord or plug has been damaged,
2.
Liquid has been spilled or objects have fallen into the amplifier,
3.
The amplifier has been exposed to rain or moisture,
4.
The amplifier has been dropped or suffered damage in any other way,
5.
The amplifier exhibits a distinct change from its normal function or performance.
Servicing
Do not attempt to service this product yourself. As opening or removing covers may expose you to dangerous voltage or other
hazards, the amplifier may only be opened by qualified personnel. Please refer to your dealer/distributor.
Servicing and Replacement Parts
All service and repair work must be carried out by an authorized dealer/distributor. When replacement parts are required, please
ensure that the dealer/distributor only uses replacement parts specified by the manufacturer. The use of unauthorized replacement
parts may result in injury and/or damage through fire or electric shock or other electricity-related hazards.
Safety Check
Upon completion of any service or repairs to this product, ask the dealer/distributor to perform safety checks to determine that the
amplifier is in proper operating condition.
