PWR-ICE250 Manual
miniDSP Ltd – Hong Kong / Email :
/ Features and Specifications are subject to change without prior notice
P 22
6.
On the menu bar, select Restore -> Upgrade Firmware, the device will go into bootloader mode with green led on
the LAN port flashing.
7.
The device will be disconnected and a pop-up showing: Please use this command to update the firmware: tftp
......
8.
Open the command prompt from Windows. You can do so with RUN - > CMD
9.
Type in the command word as displayed in the pop-up in previous step.
“
path to firmware file
” is the absolute path to the firmware file that you downloaded on your PC from the
“UserDownloads” section.
For this example, type: tftp 192.168.1.100 put "C:\pwr-ice2.hex"
10.
Hit Enter key to download the firmware to PWR-ICE2 device.
