miniDSP Ltd, Hong Kong /
/ Features and specifications subject to change without prior notice
28
6
I
NFRARED REMOTE CONTROL
Once configuration is complete, the computer is not required and can be disconnected. An infrared remote can
be used to control volume, mute, preset selection, input selection, and to turn Dirac Live processing on and. The
optional miniDSP remote can be used with the DDRC-24:
Source
Cycles through the input sources.
1, 2, 3, 4
Switches to the selected preset. Note that it takes a few seconds for the preset
selection to complete.
[Bell]
Enables or disables Dirac Live filtering. Dirac Live filtering will be effective only on
presets for which Dirac Live filters have been loaded.
Vol
Reduce or increase the volume. Each press changes the volume in 0.5 dB. Holding
down a button will accelerate volume change to 3 dB steps.
Mute
Mutes and unmutes audio output.
The DDRC-
24 can also “learn” the control codes of your current
remote if it supports one of the following remote control codes:
•
NEC
•
Sony
•
Philips RC6
•
Apple (old silver remote only)
To initiate the learning process, drop down the IR Remote menu
and select
IR learning
. Click on the
Learn
button for an operation,
and then press the desired button on the remote control. If the
code is accepted, the status will change to show a tick, as shown
at right.
To "unlearn" a command, press the
Learn
button
and wait for the plugin to time out. Note that you
cannot “learn” the miniDSP remote –
if you
program another remote and want to revert to
using the miniDSP remote, simply “unlearn” all
codes.
