The OSD functions
2-5
Column Function
Numbers
Computer numbers in groups of 8
SCN
Scanning time period
DSP
Confirmation label display time
KB
Keyboard setting, either PS or Unix
MS
Mouse type
OUT
Security Timeout period (Explained in chapter 3)
1-6
Security profiles (Explained in chapter 3)
The SCN (Scan) column
The SCN column shows the length of time in seconds that a remote computer’s screen will appear on the
Management screen during scanning.
The DSP (Display) column
The DSP column shows the length of time in seconds that the remote computer’s Confirmation label appears
on the Management screen.
Changing the SCN and DSP time spans
The
SCN
and
DSP
time spans are preset to 030 seconds. You can adjust these times to suit your needs.
To change the time span:
1. Navigate with the
Tab
or
Right
and
Left
Arrow keys to the time span you want to change.
2. Type the desired time span using the numbers above the keyboard letters.
3. Press
Esc
.
When typing over a group of three digits, the cursor automatically reverts to the first digit once you edit the
third digit.
Changing the time span of a group of computers
You can change the time spans of the
SCN
and
DSP
columns from a particular computer downwards.
To change the time span:
1. Navigate to the time span of the first computer you wish to change.
2. Type the desired change.
3. Press
End, End
. The remainder of the column takes on the same change.
4. Press
Esc
.
