Mini Pro Slot Car Dyno, Инструкция по эксплуатации

Страница: 18 / 21

17
Manual Mode (Ex. Using R/C Transmitter or Servo Tester)
TESTING SLOT CARS
1 2
3 4
5
Connect the dyno to the PC using the micro USB cable.
Move the motor with your transmitter or ser-
vo tester and try to keep a constant RPM.
When you reach maximum RPM, click “Stop Loggin Data.”
Open the Application, and
select the click “Connect.”
Click “Manual Test Tab” following the
Test number (Start Loging) you would
like the graph to show and quickly
increase the throttle to max.
NOTE: By adjusting the throttle trim
you can keep a constant RPM.
Max. RPM as soon torque and power reaches zero.
NOTE:
(2) two USB connection ports are required.