Mini Pro Slot Car Dyno, Инструкция по эксплуатации

Страница: 12 / 21

11
Electronic Board Driver Installation for Windows 10
DRIVER INSTALLATION
To open the device manager, right-click on
the Windows Start Button, and click “Device
Manager.”
Take note of the new comunication port
created by the electronic board driver.
3 4
Connect the dyno to the pc using the
micro-b USB cable.
Verify the driver was automatically installed
by opening the “Device Manager.”
1 2
NOTE:
It’s not necessary to install the electronic board driver.
(Only on Windows 10 Operating Systems)
NOTE:
The communication port is required to run the dyno.
Above port number may differ from your pc.
CONT.
NOTE:
When you plug the dyno, a new comunication port
should appear when the driver was installed successfully.