Mini Pro Slot Car Dyno, Инструкция по эксплуатации

Страница: 11 / 21

10
Electronic Board Driver Installation for Windows 7 and 8
DRIVER INSTALLATION
Select “Other Devices” and right click “Un-
known device” and then select “Update
Driver Software”
Take note of the new comunication port
created by the electronic board driver.
4 5
To open the “Device Manager”
3
Download the driver, and connect the dyno
to the pc using the micro-b USB cable.
Go to -->http://minipro.wiki/downloads
Download the latest driver and extract the driver to a
new folder.
Open the “Device Manager”
1 2
3.1. Go to --> right-click on Computer.
Click Properties
3.2. In the Properties window, click on Device Manager.
4.1. Select “Browse my
computer...””
4.2. Select “Let me pick
from a list..”
4.3. Select “Have a disk”
and locate the driver
that was saved earlier.
Note: If “Other devices” is not available, then check the
USB connection, or otherwise, It might be possible that
the driver was already been installed by windows.
NOTE:
The communication port is required to run the dyno.
Above port number may differ from your pc.
NOTE: When you plug the dyno, a new comunication port
should appear when the driver was installed successfully.
If the driver was automat-
ically installed, it might be
available under “Ports.”
OR