Mini-Circuits SSG-15G-RC, Руководство пользователя

Страница: 8 / 50

Page 8 of 50
AN-49-003 Rev.: E (September 6, 2019) M175867 (R95153) File: AN49003.doc
This document and its contents are the property of Mini-Circuits
Figure 1.9.2a SSG front panel
Figure 1.9.2b SSG rear panel
1.9.2 SSG-15G-RC front and rear panels
# Name Description
1
Front ventilation
holes
Front and rear ventilation holes must be kept clear to allow airflow
2
RF Output SMA Female connector for RF output
3
Power LED
Static LED indicates model is on
Blinking LED indicates model power or temperature exceeds the specified
limits
4
Power Switch On/Off Switch
5
Rear ventilation
holes
Front and rear ventilation holes must be kept clear to allow airflow
6
Reference
Output
Output for the generator's internal 10MHz reference (BNC female).
7
Reference Input
External reference input, if no signal is detected the generator will default to
internal reference (see section 3.12 for details)
8
Trigger Input Trigger input, see model datasheets for voltage levels (SMB Jack)
9
Trigger Out Trigger output, see model datasheets for voltage levels (SMB Jack)
10
Power supply Power supply connection, 6V power.
9
USB socket USB type Mini-B socket for USB control of generator
11
LAN socket Provides Ethernet control of Generator (see section 3.2 for details)
1.9.3 Intended Applications
Mini-Circuits Synthesized Signal Generators are intended for indoor use in the following applications:

Lab and test equipment setups for both manual and automated measurement.

Production line testing

Field testing
The SSG series models can be used by anyone familiar with the basics of electronics measurements.