Page 10 of 50
AN-49-003 Rev.: E (September 6, 2019) M175867 (R95153) File: AN49003.doc
This document and its contents are the property of Mini-Circuits
1.9.5
Conformity
Mini-Circuits Synthesized Signal Generators conform to all requirements for the following international
standards
:
RoHS
– The models comply with EU directive for Restriction of Hazardous Substances for 6
substances.
USB 2.0
– The models meet the specifications of the Universal Serial Bus Ver. 2.0 communication
standard as described by USB-IF.
USB HID
– The models meet the requirements for Universal Serial Bus Human Interface Devices
according to USB-
IF’s Device Class Definition for Human Interface Devices firmware
rev. 1.11
TCP/IP
– Ethernet communication complies with the specifications of the Transmission Control
Protocol (TCP) and Internet Protocol (IP) as defined in RFC 791 and RFC 793.
HTTP
– SSG models support all requirements for communicating with the Hypertext Transfer
Protocol
(HTTP)
as defined in RFC 1945.
Telnet
– SSG models support
all requirements for communicating with the Telnet protocol, as
defined in RFC 854.
SSH
– The SSG-15G-RC also supports the requirements for SSH protocol, as defined by RFCs
4250-4253, 4419, 5647, 5656 and 6668.
1.9.6
Supported Software Environments
Mini-Circuits SSG series synthesized signal generators have been tested in the following operating
systems:
32 bit systems: Windows 10, Windows 8, Windows 7, Windows Vista, Windows XP Windows 98
64 bit systems: Windows 10, Windows 8, Windows 7, Windows Vista, Linux
The signal generators will work with almost any software environment that supports ActiveX or .Net
including:
C++, C#, CVI
®
, Delphi
®
, LabVIEW
®
8 or newer, MATLAB
®
7 or newer, Python, Agilent VEE
®
,
Visual Basic
®
, AutoIT, Visual Studio
®
6 or newer, and more
For more information see the Synthesized Signal Generator
