Page 25 of 50
AN-49-003 Rev.: E (September 6, 2019) M175867 (R95153) File: AN49003.doc
This document and its contents are the property of Mini-Circuits
3.5
Power Scroll Bar Step Size screen
This screen (
) allows you to set the
power step size
for the scroll bar and arrows on the
main screen and the minimum and maximum limits for generator output power. Click the "Incr Set"
button on the main screen power display section to access. Please note that power steps are
always in dB, regardless of the display units set on the main screen.
Figure 3.5
Power Scroll Bar Step Size window
Small Change
– Sets the
minimum power change (in dB)
when clicking on the main screen
arrows
.
Large Change
– Sets the
minimum power change (in dB)
when dragging the power
scroll bar.
Lower Limit
– Sets the
minimum power
value (in dBm) for the
output RF
signal.
Upper Limit
– Sets the
maximum power
value (in dBm) for the
output RF
signal. This is especially
useful when the generator is connected to an amplifier or other device with a max. input
power spec that cannot be exceeded.
