Mindray DPM 1, Руководство оператора

Страница: 29 / 54

6-1
6
Maintenance
6.1 System Check
Make sure the qualified service personnel have implemented a complete inspection before
putting the device into operation, after monitor servicing or system upgrading, or after the
monitor has been used for 6-12 consecutive months. This is to ensure the normal operation
of the system.
Before using DPM1, perform the following steps.
„
Check for any mechanic damages.
„
Check for all cables and accessories for damage.
„
Check all functions of DPM1 to make sure it is in proper working condition.
In case of any damage or exception, do not use the device. Contact the technician in your
hospital or our Customer Service immediately.
WARNING
z
Failure on the part of the responsible hospital or institution employing the use of
the monitoring equipment to implement a satisfactory maintenance schedule may
cause undue equipment failure and possible health hazard.
z
The safety inspection or maintenance, which requires opening the monitor housing,
must be performed by trained and authorize personnel only. Otherwise, equipment
failure and possible health hazard may be caused.
6.2 Cleaning
Your equipment should be cleaned on a regular basis. If there is heavy pollution or lots of
dust and sand in your place, the equipment should be cleaned more frequently. Before
cleaning the equipment, consult your hospital’s regulations.
Cleaning agents:
„
Mild soap and water
„
Quaternary ammonia
„
Water/bleach solution (100:1)
„
3 vol% Hydrogen peroxide in water solution
„
70 vol% isopropyl or ethyl alcohol