Mindray BeneFusion VP3 Vet, Руководство оператора

Страница: 32 / 92

4-2
4.2 Operational Procedures
4.2.1 Turn on the Pump
To turn on the device, follow this procedure:
1. Perform a safety inspection referring to 11.1 Inspection before turning
on the pump.
2. Press , the system will initiate the self-test and the screen will
display the [ System Self-test ] interface:

System will give out a sound "di"- indicating the self-test of the
loudspeaker to be successful.

The color of the alarm indicator light will change from red to yellow,
turn on and off orderly- indicating the self-test of the alarm light to be
successful.

System will give out a sound "didi"- indicating the self-test of the
buzzer to be successful.
3. Enter the operation interface after successfully completing the system
self-test, and now you can operate the system through the key board.
WARNING

Please monitor the self-test process to make sure that the speaker, the
alarm light, and the buzzer are all self-tested successfully. Otherwise,
please contact the company and do not operate the pump until
maintenance is performed.

Please contact the company if the infusion pump is damaged or cannot
operate properly, and it cannot be used for animal infusion.
4.2.2 Load the Infusion Set
System will inspect whether the infusion set is loaded after completing the
self-test:

If infusion set is not loaded or incorrectly loaded, enter the infusion set
[ Loading Guide ] interface; If the infusion set is not required to load, press
to skip the step.

If infusion set is correctly loaded, and [ User Maintenance
]→[
Brand
Selection
] →[
On ], enter the [ Set Selection ] interface; if the switch of [ Brand
Selection ] is [ Off ], then skip the [ Set Selection ] interface.