Mindray accutorr plus, Руководство по эксплуатации

Страница: 63 / 110

How To Set The Clock (Date and Time) Operation
3 - 30 0070-10-0692-02 Accutorr Plus™ Operating Instructions
3.13 How To Set The Clock (Date and Time)
The clock can be set during normal operation or in the User Configuration. See section 3.15,
for details on entering the User Configuration. The Timer/Temp key (32), Interval/Elap.
Time/Temp Display (33), and the Up and Down arrow keys (27 & 28) are used to set the
time and date.
CAUTION: Changing any part of the time or date will cause all stored
patient information (trend data) to be permanently erased.
Viewing the time or date does NOT cause data to be erased.
1. Press and hold the TIMER/TEMP key (32) (2 beep tones, approx. 6 seconds). The hour
digit only displays.
FIGURE 3-12 Setting the Hour
2. Press the PATIENT INFO. Up or Down Arrow key (27 or 28) to change the
number.
NOTE: The Accutorr Plus always displays time in a 24 hour format.
3. Press the TIMER/TEMP key (32) to activate the minute display.
FIGURE 3-13 Setting the Minute
TIMER/TEMP
ALARMS
INTERVAL TEMP ELAP. TIME
MUTE
SET
ALARMS
Hour Display
Press and hold to
enter the clock set
mode. Set hour,
then press again
to set the minute.
Press to Change
TIMER/TEMP
ALARMS
INTERVAL TEMP ELAP. TIME
MUTE
SET
ALARMS
Minute Display
After the time and
date have been set,
press to exit the
clock set mode.
Press to Change