MIMAKI UJV500-160 Скачать руководство пользователя страница 158

Страница: 158 / 228

4-28

Cleaning Y motor

When the warning message [Y motor cleaning] is displayed, clean the Y motor with the procedures below:

Turn off the power supply, and open the Y-motor
maintenance cover.

• Remove the screw of the Y-motor maintenance cover, and

open the cover.

Open the cover for absorbing abrasion powder,
and absorb abrasion powder accumulating in the
hole for absorbing abrasion powder with a
vacuum.

• Using a flat-blade screwdriver, open the cover.

Return the cover for absorbing abrasion powder to the original status, and turn on
the power supply.

• Warning message [Y motor cleaning] is displayed on the screen.

Press the

key and clear the warning message.

• The machine returns to LOCAL.

• Do not remove the cover indicated with circles in the right

figure. It may cause the operation defect of the motor.

Screw

Y-motor maintenance

cover

Hole for absorbing

MAINT.

Содержание UJV500-160





































































































































































































































Результаты поиска

Содержание UJV500-160

Отзывы:

Бренды по названию

Популярные бренды

MIMAKI UJV500-160, Руководство по эксплуатации

Результаты поиска

Содержание UJV500-160

Отзывы:

Бренды по названию

Популярные бренды