manualshive.com logo in svg

MIMAKI UJV500-160, Руководство по эксплуатации

Поделиться
Скачать
MIMAKI UJV500-160 Скачать руководство пользователя страница 135

4-5

1

1

1

4

Routine Maintenance

Maintaining the Capping Station

Maintain the ink cap, wiper, etc. located in the capping station. (SATION MAINT.)

The ink cap and wiper function as follows.

•

Wiper

: It wipes off ink sticking to the head nozzles.

•

Ink cap

: It prevents the head nozzles from clogging due to dryness.

As the machine is used repeatedly, the wiper and ink cap gradually become dirty with ink, dust, etc.
If nozzle missing cannot be corrected even after head cleaning (

P.2-32) has been performed, use a

Washing liquid for maintenance and clean stick.

Cleaning the Wiper and Cap

It is recommended that the wiper and cap be cleaned frequently in order to maintain the high image quality of
the machine and keep the machine itself in good working order.

1

Press the 

 key in LOCAL.

2

Press the 

 key.

3

Press 

 to select [STATION MAINT.].

4

Press the 

 key.

• The carriage moves onto the platen.

Tools required for 

Maintenance

Washing liquid for maintenance (SPC-0568)

• Clean stick (SPC-0527)

• Gloves

• Goggles

• Be sure to wear the supplied goggles and gloves when maintaining the capping station.Otherwise, 

you may get ink in your eyes.

• Do not move the carriage out of the capping station by hand.When it is desirable to move the 

carriage, press the 

 key to execute the carriage-out. (

P.4-5Steps 1 to 2)

• Be sure to perform maintenance for the ink cap and the wiper of capping station every day. 

If you leave it dirty, dirt may adhere to the nozzle surface, or, dust and dry ink may be rubbed against 
the nozzle. It may cause discharge defect.

• While working, be careful to avoid subjecting the capping station to direct sunlight. Ultraviolet light will 

cure UV ink. Take measures to block sunlight, such as closing the curtains on windows. 

• When work is complete at the end of the day, clean the wipers and surrounding areas. 
• Replace the wiper with a new one when it is extremely dirty or bent.(

P.4-31)

• When cleaning the wiper, be careful that lint from the clean stick does not get left on the 

wiper.Remaining lint may cause image quality to deteriorate.

MAINT.

CARR I AGE  OUT

[ ENT ]

MAINT.

MOVE POS I T I ON

: S T A T I ON MA I NT .

MOVE POS I T I ON

: S T A T I ON MA I NT .

Carriage

Содержание UJV500-160





































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды