MIMAKI UJF-706, Руководство по эксплуатации

Страница: 55 / 184

2-19
Drawing an image from data
2
Basic Operations
Cancelling the drawing
To stop the drawing, stop the drawing operation and erase the received data from this machine.
1
Press the key while drawing.
• Drawing operation stops.
• When a data is being sent from the computer, stop
sending data from the computer.
2
Press the key.
3
Press the key.
• Received data is cleared and <LOCAL> is dis-
played.
When drawing stops
If the following error or warning appears during drawing, the machine stops drawing and returns to the local
mode.
Press the
key in the local mode to restart drawing.
Message Cause Solution
• The carriage detected an obstacle. • Remove the obstacle on the table.
*1
*1. For some detecting conditions, the machine finishes drawing and performs initial operation.
• The area sensor detected an
obstacle.
• When an obstacle was detected,
the table automatically lowers to
avoid it.
Head gap is changed.
Remove the obstacle and check
head gap again. (
P.3-5)
• The front cover is open. • Close the front cover.
* R EMO T E . 1 *
REMOTE
< L OC A L . 1 >
DATA CLEAR
D A T A C L E A R
< E N T >
ENTER
REMOTE
E R R O R 5 4
M E D I A J AM
E R R O R 3 6
H E A D G A P
! F R ON T C OV E R O P E N