MIMAKI UJF-706, Руководство по эксплуатации

Страница: 147 / 184

5-5
Troubles displaying messages
5
In
Cas
e of T
rouble
Message Solution
• Draw the all received data or clear the data. Then, change the settings.
( P.2-18 , P.3-34)
• Call a distributor in your district or our office.
• Check the amount of water in the hot water tank, and fill as needed.
( P.4-29)
• Head is not selected.
Select a head to be cleaned or to be filled.
• Close the front cover.
• Call a distributor in your district or our office.
• An error occurred during drawing. Pressing the key returns to
the local mode. Perform printing again.
• Position a data in the drawing area.
• Clean the wiper.
( P.4-26)
• Wiper tank is full. Excute dispose of ink in the wiper tank.
( P.4-14)
• Attach the washing cartridge.
• Replace the washing cartridge.
• Insert the washing cartridge again.
• Waste ink tank is near full. Excute dispose of ink in the waste ink tank.
( P.4-12)
• Waste ink tank is full. Excute dispose of ink in the waste ink tank.
( P.4-12)
• Clean the UV lamp filter. ( P.4-12)
• Shake the cartridge to beat ink.( P.4-22)
(At the time of SPC-0516 ink cartridge use)
• Perform white maintenance. ( P.4-21)
(At the time of SPC-0516 ink cartridge use)
< L O C A L . 1 >
D A T A R E MA I N
B A T T E R Y E X C H A N G E
WA T E R L A C K
N O H E A D S E L C T
! F R ON T C OV E R O P E N
H D D A T A S E Q
! P R I N T E R R O R
P R E S S < E N T > K E Y
ENTER
R A N G E OV E R X Y
R A N G E OV E R X
R A N G E OV E R Y
! C L E A N W I P E R
W I P E R T A N K F U L L
< L O C A L . 1 >
! W a s h L iq u i d C a r t r . N ON E
< L O C A L . 1 >
! W a s h L i q u i d E N D
< L O C A L . 1 >
! WR ON G WA S H C A R T .
! WA S T E I N K T A N K
! WA S T E I N K T A N K F U L L
MA I N T E N A N C E WA R N I N G
C L E A N U V L AM P F I L T E R
MA I N T E N A N C E WA R N I N G
S h a k e a C a r t r i d g e
MA I N T E N A N C E WA R N I N G
W R o u t e
D i s c h a r g e