MIMAKI UJF-706, Руководство по эксплуатации

Страница: 54 / 184

2-18
Drawing an image from data
Starting the drawing
1
Set a media ( P.2-11).
2
When <Local> is displayed, press the
key.
• Remote will be displayed and then the machine can receive the data from the computer.
3
Send a drawing data from the
computer.
• Drawing conditions are displayed.
• As for the sending way of data, see the operation
manual of the software used.
4
Drawing starts.
• The print origin is not changed after drawing.
5
Take out the media after drawing.
• Be sure to setup the appropriate air-moving system in case of using the device in a closed
room or a room with bad ventilation.
• If the UV irradiation device is not ready or the temperature of the water heating system has not
reached the predetermined value, a message is displayed. Drawing is not allowed in such
cases. When the display is disappeared, drawing can be started.
• Data can be sent even if both errors are displayed. Drawing starts after the errors are
disappeared.
• If you perform drawing with the hot water temperature
not reaching a certain temperature, the right message is
displayed on the screen. When you press the
key, drawing starts, however, the image quality may be
degraded.
* R EMO T E . 1 *
REMOTE
* R EMO T E . 1 *
1 2 0 0 X 1 2 0 0
HOS T / 1 6 / U / H
Resolution: 1200DPI
HOST is set on priority: “HOST” appears.
PLOT is set on priority:
Print quality (STD/FINE/FAST) appears.
Scanninng speed
N:Standard
H:Double speed
Scan direction
U:Unidirectional
B:Bidirectional
Number of passes
WA T E R T EMP NO T R E A D Y
P R I N T S T A R T : e n t
ENTER