MIMAKI UJF-605RII, Руководство по эксплуатации

Страница: 50 / 170

- 2-8 -
Media Thickness (mm) Width(mm) Tension Vacuum
OPP 0.02 600 50 to 60 25
0.03 10 to 80 25 to 40
0.06 10 to 90
PET 0.025 10 to 30
0.05 10 to 90
Setting Media
Types of Usable Media
Only media which meet the following conditions are available:
• When the media size is small and adsorption holes are free, cover them on the table
and fix them by an adhesive tape so that any printing trouble does not occur.
• Tape up or paste a weak adhesive or the end of the roll media.
• The thickness of usable media is for roll film media from 0.02 to 0.2 mm,
and for leaf media with 0.02 to 2.0 mm.
• Pouched films or tube films are unusable because they cannot be ab-
sorbed to the table.
• Set the media properly not to cause any wrinkles. Otherwise, printing does
not work well.
• Do not use media larger than the table area.
Indications of the Tension Volume and the Vacuum Volume
The following describes the tension volume and the vacuum volume for OPP and PET.
Finely adjust it not to cause any wrinkles.
Roll Media Leaf Media
Width Max. 640mm, Min. 180mm Max. 620mm, Min. 180mm
Max. Length According to the roll length 520mm
Max. printing width 600mm x 500mm
Thickness 0.02 to 0.2mm 0.02 to 2.0mm
Roll outside diameter Ø180 mm or less –
Roll weight 25kg or less –
Roll inside diameter 3 inch –