MIMAKI UJF-605RII, Руководство по эксплуатации

Страница: 119 / 170

- 5-5 -
5. Touch the [ENTER].
Printing of the test patterns for adjusting the dot
position is started. Six types of test patterns are
printed.
6. Touch the JOG [ ] or [ ] to adjust the dot
position of [PATTERN 1].
The six test patterns are sequentially named
[PATTERN 1] to [PATTERN 6].
Select the correct dot position on [PATTERN 1]
with the JOG.
Select the dot position that make a straight line on
the test pattern.
• If the adjustment value for straight
lines is not within -15 t15,
adjust the head height and then adjust
it again with [PRINT ADJUST].
7. Touch the [ENTER].
8. Repeat STEP 5 and 6 to adjust the dot
position on [PATTERN 2] to [PATTERN 6].
Select the correct dot position on each of the
patterns.
The [PRINT ADJ] is displayed.
9. Touch the [ENTER] to finish this dot
position adjustment.
Touch the [END] and the printer returns to the
LOCAL mode.
PRINT ADJUST
PATTERN 2
: ∗ . ∗
MAINTENANCE
PRINT ADJ
< ent >
PRINT ADJUST
PATTERN 3
= 0.0
PRINT ADJUST
PATTERN 4
= 0.0
PRINT ADJUST
PATTERN 5
= 0.0
PRINT ADJUST
PATTERN 6
= 0.0
* * DRAW * *
PRINT ADJUST
PATTERN 1
:
∗ . ∗
Out put direction
The 4th line from zero position is
printed straight.
In this case, the adjustment
value is 4.0