MIMAKI Tx500P-3200DS, Руководство по эксплуатации

Страница: 19 / 156

1-5
Chapter 1 Before Use
1
2
2
2
2
Operation Panel
Use the operation panel to make settings for printing or operate this machine.
*1 : Ink Status
Status of the ink tank (remaining ink/error, etc.) is displayed using icons.
Each icon is described below.
Icon Contents
Displays the remaining ink amount in nine levels, in the order of the ink cartridge set in the slot.
The remaining amount decreases moving to the right.
Indicates that the ink cannot be used due to ink end or ink error.
Indicates that ink has expired or that one month has passed after the expiration date. Please use quickly. Ink can no
longer be used if two months have passed after the expiration date.
REMOTE MENU
TEST PRINT /
CLEANING
Local <Setup 1> 12:00
1340mm
179
°
C/180
°
C
CONSTANT
Status indicator lamp
Indicates the machine’s status (printing, error occurred, etc).
Condition of
Lamp
Condition of machine
OFF
Machine is in LOCAL mode, no print data has been received,
and no errors have occurred.
Lit steady Light
blue
Switched to Remote mode.
Flashing Light
blue
Currently printing.
In test printing: printing a pattern stored inside the machine.
Lit steady blue Print data still remains in the machine.
Flashing red Error has occurred.
Lit steady red Error (SYSTEM HALT) has occurred.
Display
Displays the following items:
• Printer status
• Time Display
• Set media width
• Heater temperature (current tempera-
ture/set temperature)
• Ink status
*1
• Functions assigned to [FUNC1] to
[FUNC3]
*2
key
Changes over the functions of the
function keys ([FUNC1]–[FUNC3]).
/ / key
Press this to set various functions or
to do test printing. The function
keys’ functions are changed each
time [SEL] key is pressed.
JOG key
Use these keys to shift the carriage or
the media in [LOCAL]. Also use them to
select an item of printing conditions.
key
Cancels the last input value or returns
the setting menu to the immediate
higher level of the hierarchy. Also, press
this to turn the power on or off. (Give it a
long press to turn the power off.)
key
Registers the last input value as the
setting value or goes to the immediate
lower level of the hierarchy.
• The [ENTER] key under the operation panel lights in blue when the power is turned on, and off when the power switch
is turned off. The ink clogging prevention function is periodically operated even when the power switch is OFF if the
main power switch (
P.1-4) is ON.(Auto maintenance function)
ink full
Approximately
1/8 consumed Approximately
1/4 consumed Approximately
3/8 consumed Approximately
1/2 consumed Approximately
5/8 consumed Approximately
3/4 consumed Approximately
7/8 consumed
near end