MIMAKI Tx500P-3200DS, Руководство по эксплуатации

Страница: 56 / 156

2-26
Chapter 2 Basic Operation
6
Exit REMOTE mode.
(1) Touch the button.
The status changes from [WAITING] to [MAINTE].
When you do not control the color
fixation device from the printer
1
Turn on the main power supply of color
fixation device.
2
Start LOCAL mode.
(1) Touch the button.
The status changes from [MAINTE] to
[WAITING].
3
Turn on heater.
(1) Touch the button.
The operation screen is displayed.
(2) Touch the of the [HEATER].
The heater turns ON and the status changes
from [WAITING] to [HEATING].
You can go back to the previous screen by pressing
button.
4
Start printing.
• When the furnace temperature stabilizes at the
set temperature, the status changes from
[HEATING] to [READY].
(1) Adjust the opening at the aperture
plate.(
P.2-27)
(2) Send print data from computer to printer.
Printing will start.
5
Turn OFF heater.
(1) When printing is completed, touch the
button.
The operation screen is displayed.
(2) Touch the of the [HEATER].
The heater turns off and the status changes
from [READY] to [COOLING].
You can go back to the previous screen by pressing
button.
• When the furnace temperature falls below 60
degree C, the status changes to [COOLING] →
[WAITING].
6
Exit LOCAL mode.
(1) Touch the button.
The status changes from [WAITING] to
[MAINTE].
25.0
MAINTE
180.0
WAITING
HEATING
• If you leave the heater on without starting printing,
the heater will turn off automatically.
• For the time to turn off the heater, refer to
P.2-24
「
Set off timer
」
READY
COOLING
59.0
WAITING
180.0