MIMAKI Tx500P-3200DS, Руководство по эксплуатации

Страница: 124 / 156

4-28
Chapter 4 Maintenance
4
Replace the ink absorber.
• Pull out the knob at the bottom of the NCU, and
replace the ink absorber.
5
Close the front cover.
6
Press key.
• The screen returns to step1.
7
Press key several times to end
the setting.
Tank Calibration
This machine manages the remaining amount of ink with
the weight balance that is built in the external ink supply
unit.
If there is a difference between the remaining amount of
ink displayed on the upper part of external ink supply unit
and the actual ink remaining amount, or when the error
message “INKTNK SENS” has occurred, please perform
the following tasks.
Method for correcting the weight
balance
There are two types of correction method for the weight
balance.
Correct by the correction method
“Normal”
1
Press the
(MENU)
in LOCAL.
2
Press to select “Maintenance”
and press the key.
3
Press the
(>>)
.
4
Press to select “Tank
Calibration”, and press the key.
5
Press to select “Normal”, and
press the key.
6
Press to select an ink tank (slot 1
To 8) to be corrected, and press the
key.
7
Remove the ink tank cover.
• remove the screws (7 places) that is attached to
the ink tank cover, and remove the cover.
Normal
Using a 1kg wight, you can correct in high
accuracy.
Adjust
Zero
Pos.
You can correct without using a weight.
The correction work is carried out easily but less
accurate than the adjustment in the “Normal”.