MIMAKI Tx500P-3200DS, Руководство по эксплуатации

Страница: 83 / 156

Chapter 3 Setup
3-15
3
2
2
Setting Interval wiping
When a set time has elapsed, the machine automatically
wipes the nozzle surfaces of the head to remove any ink
droplets attached to the surfaces.
In case that deflection, nozzle missing, or symptom which
ink droplets fall down occurred, set the interval between
each operation shorter.
1
Press the
(MENU)
key in
Local.
2
Press to select SETUP 1 to 4, and
press key.
• Setup menu will be displayed.
3
Press the
(>>) twice.
4
Press to select “Interval Wiping”
, and press the key.
5
Press to set intervals.
• Set Value : 3 to 255 min, OFF
• When selecting 3~255 min, execute the feed
setting.
• When turning it ON, it feeds the media until the
media passes Color fixation device.
• When [OFF] is set, periodical wiping is not
executed.
6
Press key.
7
Press key several times to end
the setting.
Setting Head Gap
Set the head gap (height from the media to the nozzle
plane of the heads).
1
Press the
(MENU)
key in
Local.
2
Press to select SETUP 1 to 4, and
press key.
• Setup menu will be displayed.
3
Press the (<<).
4
Press to select “Head Gap” and
press the key.
5
Press to select the Head Gap
value, and press the key.
• Set value : 1.5 to 7.0mm
6
Press key.
7
Press key several times to end
the setting.
• The color tone may change, depending on the
timing when periodic wiping is performed. Check
in advance that the color tone is not affected.