MIMAKI JV4 Series Скачать руководство пользователя страница 129

Страница: 129 / 152

- 4.19 -

MENU DISPLAYED AFTER THE INK CARTRIDGE IS INSTALLED [FILL UP INK]

When the ink cartridge is replaced with a new one or a new ink cartridge is installed, the device

charges ink automatically. Therefore, a menu for charging ink is included in the maintenance func-

tions. Normally, however, this function is not used.

WHEN CHARGING INK DIFFERENT FROM THE ONE IN USE [INK CHANGE]

The INK CHANGE function charges ink different from the one currently in use. When the same

type of ink as is set in the ink station is to be used, it is unnecessary to execute this function.

•

Be sure to use the inks and ink cartridges specified by MIMAKI. Please be

noted that MIMAKI ENGINEERING CO., LTD. shall have no liability for any

trouble that arises when using any ink cartridge or ink other than the genu-

ine MIMAKI brand ones.

•

For ink replacement, please purchase the optional Washing Liquid cartridge

in advance.

•

Before replacing ink, empty out the waste ink tank.

STEP

Cause the display to give the indication "LO-

CAL".

(See page 4.3)

Push the [ENTER] key.

Push the [ ] and [ ] key until the display gives

the indication [INK CHANGE].

Push the [ENTER] key.

Specify the type of ink to be filled in the left ink station.

Set the type of ink to be filled in the R-row ink

station by pushing the JOG keys [ ] and [ ].

[Pigcm]

Water-soluble pigment ink (Light set)

[PigOG]

Water-soluble pigment ink (Orange, Green set)

[Dye]

Water-soluble dye ink

[Sub]

Disperse dye ink

FUNCTION
MAINTENANCE

< ENT >

MAINTENANCE
LIST

< ent >

MAINTENANCE
INK CHANGE

< ent >

Ink Type

R : Pigcm

F : Pigcm

Ink Type

R : Dye

F : Pigcm

Содержание JV4 Series

























































































































































Результаты поиска

Содержание JV4 Series

Отзывы:

Похожие инструкции для JV4 Series

Бренды по названию

Популярные бренды

MIMAKI JV4 Series, Руководство по эксплуатации

Результаты поиска

Содержание JV4 Series

Отзывы:

Похожие инструкции для JV4 Series

Бренды по названию

Популярные бренды