MIMAKI JV4 Series, Руководство по эксплуатации

Страница: 122 / 152

- 4.12 -
STEP
1. Move the carriage.
Execute the station maintenance [CARRIAGE OUT]. (Refer
to step 1 to 6 on page 4.8)
2. Open the maintenance cover, then clean up the
wiper as described below.
3. Clean the wiper guide shaft using a cotton bud
or cloth.
(If dirt is hard to remove, use a cotton bud of cloth
damepened with water.)
•
Extremely dirty wiper guide shaft may cause
operation failure of the wiper, resulting in error
display.
4. Execute steps 7 to 8 of the station mainte-
nance [CARRIAGE OUT] on page 4.9.
Do not rub
the felt surface
Rubber surface
Guide shaft