MIMAKI JV4 Series, Руководство по эксплуатации

Страница: 104 / 152

- 3.24 -
SETTING UP AUTO-CLEANING FUNCTION [AUTO CLEAN]
Set up the [AUTO CLEAN] function. Plotting failures may be remarkable on dusty locations or
locations with low temperature. Perform cleaning for each plot to prevent plotting failures.
ON : The head is cleaned automatically.
OFF : The head is not cleaned automatically.
STEP
1. Select a type.
(See page 3.4). Here, select [Type.1].
2. Push the [ENTER] key.
3. Push the [ ] and [ ] key until the display gives
the indication [AUTO CLEAN].
4. Push the [ENTER] key.
5. Set a AUTOcleaning by pushing the JOG keys
[ ] and [ ].
Here, select [ON].
6. Push the [ENTER] key.
7. Push the [END] key twice, and the menu returns
to the LOCAL mode.
SET UP
SELECT : TYPE.1
TYPE.1
PRINT MODE
< ent >
TYPE.1
AUTO CLEAN
< ent >
TYPE.1
AUTO CLEAN
: OFF
TYPE.1
AUTO CLEAN
: ON
TYPE.1
AUTO CLEAN
< ent >
<< LOCAL >>
width : 1272mm