MIMAKI JV4 Series, Руководство по эксплуатации

Страница: 127 / 152

- 4.17 -
CHECK IF THERE IS A GAP BETWEEN LINES OF IMAGE ON ARTWORK FILM
[PATTERN 100%]
When artwork film is used, use only black ink. The PAINT function tests whether or not the image is
plotted on the film without any gap between lines.
With this function, it is possible to perform test plotting by specifying an image quality and plotting
density.
STEP
1. Put the device into the FUNCTION mode.
(See page 4.3)
2. Push the [ENTER] key.
3. Push the [ ] and [ ] key until the display
gives the indication [ARTWORKtest].
4. Push the [ENTER] key.
5. Select Paint-out [PATTERN 100%] by pushing
the JOG keys [ ] and [ ].
6. Push the [ENTER] key.
The image quality and plotting density that have been
specified in the ARTWORK mode are displayed. (See page
2.6, 3.22)
[STD.] shows STANDARD
[QUA.] shows QUALITY
It becomes [STD.3 /NORMAL] when the artwork mode isn't
chosen.
7. It is possible to change the image quality and
plotting density by pushing the JOG keys [ ]
and [ ].
By specifying the optimum image quality and plotting density
according to the medium used, it is possible to obtain
optimum result of plotting. (See page 3.22)
Select from the following 12 patterns.
STANDARD1 to 3 : [NORMAL] or [THIN]
QUALITY1 to 3 : [NORMAL] or [THIN]
8. Push the [ENTER] key.
The paint-out operation starts.
FUNCTION
MAINTENANCE
< ENT >
MAINTENANCE
LIST
< ent >
MAINTENANCE
ARTWORKtest
< ent >
MAINTENANCE
PATTERN
: NOZZLE
MAINTENANCE
PATTERN
: 100%
MAINTENANCE
STD1/NORMAL
< ent >
MAINTENANCE
STD1/ THIN
< ent >
MAINTENANCE
PRINTING