- 4.8 -
MOVING THE CARRIAGE TO CLEAN THE STATION INTERIOR [CARRIAGEOUT]
This function moves the carriage for maintenance of the ink station.
The interior of the station needs maintenance when a blurred test pattern is not corrected even after
the cleaning function (page 2.9) is executed or when a consumable part is to be replaced.
•
Do not move the carriage out of the capping station by hand. Use the appro-
priate operation key to move the carriage.
STEP
1.
Put the device into the LOCAL mode.
(See page 4.3)
2.
Push the [ENTER] key.
3.
Push the [ ] and [ ] key until the display gives
the indication [STATION].
4.
Push the [ENTER] key.
5.
Push the [ENTER] key.
Carry out the following maintenance of the station interior.
6.
Open the maintenance cover, then perform the
following maintenance works for the station
interior.
•
For the method of maintenance of the station,
see pages 4.9 through 4.13.
1. Cleaning the ink cap (See page 4.9)
Clean the surfaces around the ink caps in the station.
2. Replacing the cutter blade (See page 4.10)
The cutter blade is a consumable part. When the cutter
blade has become blunt, replace it with a new one.
3. Cleaning or replacing the wiper
(See page 4.11 through 4.13)
Clean or replace the wiper.
•
The device tells when to replace the wiper.
When the message [REPLACE WIPER] is
displayed on the LCD, replace the wiper.
FUNCTION
MAINTENANCE
< ENT >
MAINTENANCE
LIST
< ent >
MAINTENANCE
STATION
< ent >
STATION
MENT
: CARRIAGEout
STATION
COMPLETED
: ent
Содержание JV4 Series
