MIMAKI JV3-130 SP II, Руководство по эксплуатации

Страница: 83 / 144

- 4.9 -
MARGIN
This function sets a dead space to increase/decrease the right and left margins of the media.
The function is used to increase the margin for binding.
You can set a dead space for each of the right and left margins of the media.
(-10-85 mm)
COLOR PATTERN
Plots a color pattern at the right end of the media. Nozzle clogging can be checked during
plotting.
When color pattern is ON, plotting start position glides 18mm from the origin to the scan direc-
tion. The plotting working width becomes smaller. Therefore, when plotting is made all the way
to both ends of the media, turn this function off.
Origin
18 mm
REFRESH
Solidification of ink can be prevented by refreshing the head during plotting.
If this function is executed in a dusty place or dry place, ink in the head will be likely to solidify.
A larger level results in more number of refreshes.
(LEVEL0-3)
DATA
PRE-FEED
Media that require high heater temperature for plotting, or other types of media that have a soft
surface, sometimes stick to the platen or rise from the platen. This will cause a feed problem
and a service call may be necessary.
When such a problem is anticipated, set PRE-FEED to ON. Prefeed function works automati-
cally to prevent the media from sticking to the platen by feeding the media to back and forth a
little before execute plotting.
(ON, OFF)
(6 color model)