MIMAKI JV3-130 SP II, Руководство по эксплуатации

Страница: 79 / 144

- 4.5 -
Setup functions
The following describes the overview of and settings for each function.
Name Function
MEDIACOMP. Correct the amount of feed for media P.4-6
HEATER Set the printer heater condition P.4-6
PRINT MODE Set the plot quality, plot direction, and logical seek P.4-7
INK LAYERS Set the number of over writing P.4-8
DRYING TIMES Set an ink drying time P.4-8
AUTO CUT Cut off the media automatically at the end of plotting P.4-8
PRIORITY Specifies the value set (host /panel) P.4-8
PRE-FEED Feeding the media to back and forth before execute plotting P.4-9
MARGIN Set a dead space of the media P.4-9
COLOR PATTERN Plot a color pattern for Nozzle clogging check P.4-9
REFRESH Refreshing the head during plotting P.4-9
MEDIA SET Set the method of the media ditection P.4-10
VACUUM Set the absorbability of the media. P.4-10
MM / INCH Set a unit of set values. P.4-10
STAMP Print the date of output and plotting condition P.4-10
AUTO CLEANING Head cleaning automatically per plotting P.4-10
SETUP RESET Reset the currenct plotting conditions P.4-10