MIMAKI JF-1610, Руководство по эксплуатации

Страница: 37 / 142

2-5
2
Basic Operations
Setting the media
Setting the media on JF-1610
1
Switch over the suction valve at the
front of the table adjusting with the size
of the media to be set.
• The valve is opened when the knob is turned
vertically and closed when it is turned horizontally.
2
Pressing the key, put on the “VACUUM” lamp.
3
Pressing the key, absorb the media to the table.
• Turn ON/OFF the vacuum pressing the key.
• The absorption area will become as shown in the
figure on the right.
• When you want to change the point of origin, please
refer to P.3-2.
• If, within the absorption area, there are suction holes not closed by the media, close such
suction holes placing thin sheet form material such as paper, film or tape.
• The peripheral parts of the media could roll up due to heat. Fix the media supplementarily
using adhesive tapes, etc.
• Guide holes are provided at the edges (3 edges) of the table to insert the screw, etc. available
in the market. Use them as the guides for setting the media straight. ( P.3-19 )
Open Close
VACUUM/BLOW
ON/OFF
ON/OFF
800
1600
Origin
Suction valve
Absorption area