MIMAKI JF-1610, Руководство по эксплуатации

Страница: 36 / 142

2-4
Turning the power ON
1
Press the power button
• Press the power button n the left side of the
operation panel to light.
• When the main power switch is not set to ON, the
power is not connected even if the power button is
pressed. If the lamp does not light even if the
button is pressed, check the main power switch on
rear side of this unit.
• When the power is switched on, the LCD displays
the firmware version number.
• Initial operation is started.
2
Local Mode starts
3
Turn the power of connected computer ON.
• When the power is turned ON, the Y-bar moves. To avoid injuries, keep your hands away from
the table.
• If the temperature in the hot water device has not reached the predetermined value, a
message is indicated. In this case, drawing is disabled. It is enabled when the error indication
has disappeared.
J F - 1 6 3 1 s t a r t - u p
v e r . * . * *
P L E A S E WA I T
< L OC A L >
2 . 5 mm