28
MW190 Dissolved Oxygen & Temperature Bench Meter
Manual Log on Demand
1. From the Setup mode, set Log Type to MANUAL.
2. From the measurement screen press LOG/CLEAR.
LCD displays “PLEASE WAIT”. The LOG ### “SAVED” screen displays stored log number.
“FREE” ### screen displays the number of available records.
Log on Stability
1. From the Setup mode, set Log Type to STABILITY and the desired stability criteria.
2. From the measurement screen press LOG/CLEAR.
LCD displays “PLEASE WAIT” then “WAITING”, until stability criteria is reached.
Note:
Pressing ESC or LOG/CLEAR with “WAITING” displayed, exits without logging.
The LOG ### “SAVED” screen displays stored log number. “FREE” ### screen displays
total number of available records.
Interval Logging
1. From the Setup mode, set Log Type to INTERVAL (default) and desired time interval.
2. From the measurement screen press LOG/CLEAR.
LCD displays “PLEASE WAIT”. The LOG ### LOT ### screen displays the measurement
log number (bottom left) and interval logging session lot number (bottom right).
3. Press RANGE/
during logging to display the number of available records
(“FREE” ###). Press RANGE/
again to return to return to active logging screen.
4. Press LOG/CLEAR again (or ESC) to end current interval logging session. LCD
displays “LOG STOPPED”.
