Millipore APC ErgoTouch Pro 2, Руководство по эксплуатации

Страница: 8 / 36

8
Providing Power
The Model APC ErgoTouch Pro 2 may be powered using a rechargeable lithium-ion
battery, or through an AC power cord.
NOTES
• When using AC power, the battery (if installed) charges when the instrument
is on, but not while actively sampling.
• Removing/changing the lithium-ion battery or disconnecting AC power does
not cause loss of data.
To Install the Lithium-Ion Battery
1. Remove the battery cover from the back of the instrument by lightly depressing
the textured tab on the cover located on the lower left.
2. Place the lithium-ion battery into the battery compartment and slide it forward
(toward the top of the unit) until it locks into place.
3. Replace the battery cover and slide it in place until you hear a click.
WARNING
The battery supplied has built in protection against explosion
and fi re hazard. Do not use a substitute.
WARNING
Do not use non-rechargeable batteries in this instrument.
Fire, explosions, injury or other hazards may result.
To Use AC Power
1. Connect the AC power adapter to the power cord.
2. Insert the AC power adapter into the side of the Model APC ErgoTouch Pro 2
3. Connect the power cord to an outlet.
4. Press the on/off button
(located on the front of the instrument handle).
5. After a splash screen displays the logo, a brief start-up sequence begins as
the Windows® CE operating system boots up.