Millipore APC ErgoTouch Pro 2, Руководство по эксплуатации

Страница: 16 / 36

16
Print Setup Screen
A hard copy of a sample set or statistics can be printed
from the instrument using an optional thermal printer.
Use this screen to set print parameters. Press OK
when finished.
Field Description
Serial Number Indicates that the serial number of the particle counter used to collect the data
will be printed.
Model Name Indicates that the model number of the particle counter used to collect the data
will be printed.
Separator Indicates a line separator will be printed after the Model Name and Serial Number
in the header of all printouts
Differential Indicates that the differential value of the data will be printed.
Cumulative Indicates that the cumulative value of the data will be printed.
Last Calibration The date and time the instrument was last calibrated.
NOTE
Printer paper has a colored strip printed on the last few feet of each roll to indicate when it is time
to change the paper roll.
Print Schedule Screen
Use this screen to schedule automatic printing. You
can choose to either print when an alarm occurs or
print whenever a sample is complete.
Field Description
Automatic Printing Enables automatic printing when checked.
On Sample Print data whenever a sample completes.
On Alarm Print data when an alarm condition occurs.