Millipore APC ErgoTouch Pro 2, Руководство по эксплуатации

Страница: 18 / 36

18
Display Screen
This screen lets you set or change visual parameters
Field Description
Screen
Alignment Press this item to reset the screen
alignment, and follow the directions
on the alignment screen.
Information Screen
This screen lets you view the system’s model, serial
number, copyright, manufacture date, calibration
date, next calibration date, firmware version, USB IP
address and date and time format. Press Close when
finished.
Communications Screen
This screen lets you configure the IP address, subnet,
and default gateway to which the instrument belongs.
Field Description
IP Address The numerical identifi cation (logical address) that is assigned to this device
when participating in a computer network utilizing the Internet Protocol for
communication between its nodes.
Subnet Mask A network of computers and devices that have a common, designated IP address
routing prefi x. All hosts within a subnet can be reached in one “hop” (time to
live = 1), implying that all hosts in a subnet are connected to the same link.
Default Gateway A node on the computer network that serves as an access point to another net-
work and is chosen when the IP address does not belong to any other entities in
the Routing Table.
Use DHCP (Dynamic Host
Confi guration Protocol) When checked, this protocol is used to automatically obtain the information
necessary for operation from a DHCP server running on your local network.
NOTE
TCP/IP is an industry standard networking protocol that allows computers and devices to communicate
over Ethernet and other media access channels. Providing full details on how to confi gure an IP network
is beyond the scope of this manual. Please contact your company IT department or a qualifi ed network-
ing professional if you are not qualifi ed to confi gure such a network.